Auto Firmware Update Failed on Orbi. Need Help!

Netgear Orbi devices are automatically updated on a regular basis. Users, however, also prefer to get their devices updated manually. Whether auto or manual, Orbi firmware updates are very essential for its optimal performance.  You must keep your device updated to the most recent version for getting its best performance. Despite the fact that updating firmware on Orbi devices is a pretty easy task, users often get stuck. If you are also standing in the same queue, then try the troubleshooting process that we have highlighted in this guide.

 

How to Fix Orbi Auto Firmware Update Failure?

1.    Use Manual Method

We suggest you update your Netgear Orbi router and satellites using the manual process. Perhaps the issue exists only with the auto update process only. In case you fail in updating your device using the manual process also or you prefer using only the auto update then try the next hack.

2.    Reboot Orbi Devices

At times minor software glitches are the reason behind major issues. The same might be happening with your device too. Getting them fixed is easier by using the reboot process. Learn how to reboot your Orbi system by going through the guidelines given below:

• Disconnect the Orbi router from the modem first.
• Turn off the router and remove its power cable.
• Do the same with your satellites.
• You must wait for at least 5 minutes now.
• After 5 minutes, connect the router to the modem.
• Turn on the router and satellites finally.

Try to update the Orbi devices now. The occurrence of the same issue calls for trying the next hack.

3.    Verify the Connections

Another cause for firmware not getting updated is faulty connections between the devices. The connection between the modem and router might be unstable which is why you are stuck. Take a thorough look at the cables and wires connected. If you find any of them is damaged, then either get it fixed or replace it with a new one. Another important point that you must take care of is that no connection is loose. All the cables must be properly intact in their places.

Once the connections are verified access the Orbi router login page to update its firmware.

4.    Ensure Non-Fluctuating Power Supply

While the firmware is getting updated, if the process gets halted in between, then there are chances that the device that you are updating gets corrupted. The most common reason for the interruption is poor power supply. Thus take a good look at the power socket that you have put to use to supply electricity to the Orbi devices. You must also check the power supply to the modem as well as the computer/laptop that you are using to update Orbi.

5.    Update Web Browser/Orbi App

In case it is the Orbi app that you are using to update your device, then make sure that you are using its updated version. Go to Play Store or App Store and get the Orbi app updated right away.

If you are using a computer or laptop, then firstly make certain that it has the latest OS installed. Secondly, use an updated internet browser to get the task at hand executed. Also, consider clearing the cache and cookies of the browser.

6.    Use the Correct Instructions

Make sure that the steps that you are using to update the Orbi devices ate the right ones. Do not skip any step in between. For your assistance, we have provided you with the instructions about how you can update your Netgear Orbi device:

• Ensure that the Orbi devices are plugged in and receive a consistent power supply.
• Unlock your smartphone and connect it to the Orbi network.
• Launch the Orbi app.
• Use the admin credentials to log in.
• Once you have logged in, tap on the Menu option on the top left corner.
• Next, tap Settings> Router Settings.
• Now, tap on Check for Updates.
• If a new update is ready, it will be displayed here.
• Keep on following the on0screen prompts further to complete the firmware update.

Your Orbi devices will be updated easily. You can also use the orbilogin URL on your computer to update your Orbi.

The Final Note

This is all about how you can get your Orbi devices updated by removing all the hindrances that were stopping you from getting the job done.