Top Tips to Fix Netgear Router Not Connecting to Modem Issue

The Netgear router not refusing to connect to the modem issue is not letting Netgear router users gain access to a blazing-fast and seamless internet connection. In case, you are also tired of experiencing the same issue even after performing routerlogin.net setup successfully, then it is because of the following reasons:

• There is too much distance between the router and the existing device.
• You have connected the devices with the assistance of a wireless medium.
• Mirrors and fish tanks are kept near the router.

Now that you have familiarized yourself with what might have caused the issue in debate, the time has come for you to walk through the solutions to resolve it.

[Fixed] Netgear Router Not Connecting to Modem Issue

1. Reduce the Extra Distance

Commence troubleshooting by checking the distance between the Netgear wireless router and the existing modem. In case the router is kept in one corner of the house and the existing modem is kept in another, then you need to change that right away.

We are suggesting you this because a lot of distance between the networking devices can make it hard for them to propagate signals throughout the house. While trying to reduce the distance, make sure that you are not completely eliminating it.

The reason being, too less distance can force the signals of your devices to clash or collide thereby putting you in yet another position to experience technical issues, much bigger than the Netgear router not connecting to modem issue.

2. Switch the Connection Source

As mentioned under the list of reasons, chances are you have connected the Netgear router and the modem with the aid of a wireless source of connection due to which you are stuck with the Netgear router not connecting to modem issue.

To take care of the issue, you need to use another connection source. In simple words, use a wire to connect the networking devices. For this, you ought to connect one end of the wire to the router and another to the modem.

Make sure that you are establishing a finger-tight connection. Apart from this, ensure that the Ethernet ports located on the router, as well as the device, are not damaged. Now, check if you are able to access the internet connection or not.

3. Relocate the Netgear Router

Considering you are reading this troubleshooting tip, it means that you are still going bonkers because of the Netgear router not connecting to modem issue. In this case, you should check where the router is placed.

In case it is kept near reflexive surfaces like mirrors and fish tanks, then you need to change its location right away. The same can be done if you unplug your router from its wall socket, and plug it into the one where the modem is kept.

Additionally, keep the router away from cordless phones, washing machines, baby monitors, treadmills, televisions, microwave ovens, Bluetooth speakers, refrigerators, and other similar smart home appliances or electronic devices.

Did Nothing Work?

We only recommend this hack when users have tried everything and nothing worked for them. Given the fact that you are amongst them, you should consider restoring your networking device to its default factory values too.

Now, the question arises, how to reset Netgear wireless router? Well, the process is quite simple. You just need to locate and press the Reset button on the router. Just make sure that you are not pressing it with bare hands. See to it that only the oil pin or paper clip is being used by you to do the needful.

After resetting your networking device, set it up from scratch using routerlogin.net. In case, you come face to face with the routerlogin.net not working issue while trying to do so, then use the default IP to log in and set up the device.

To Conclude

With the hope of helping you out, we are ending this guide written on how to troubleshoot the Netgear router not connecting to modem issue. We are anticipating that after reading the tips given above, you will successfully be able to connect the router to the modem, be it via a wired source of connection or wireless. The choice is yours.