3 Stage Water Filter / Purifier
3 স্টেজ ওয়াটার ফিল্টার / পিউরিফায়ার
TECHNICAL DETAILS
Inlet pressure for filter without pump, atm: 3–6*
Inlet pressure for filter with pump, atm: 2–4.5*
Pressure in storage tank, atm: 0.4–0.6**1
Temperature of feed water, °C: +4…+30***
Filter weight (basic configuration), kg: 7
Temperature of environment limit, °C: +5…+40***
Water supply external connection, inches: thread, ½
Recommend using qualified installer.
* If the pressure in the water supply system is lower than indicated, the filter should be supplied with a pump. If the pressure in the water supply system is higher than indicated, it is necessary to install a pressure regulator at the inlet before the reverse osmosis filter.
** If the pressure is lower or higher than indicated, it is necessary to pump up or release the pressure.
*** If the temperature of feed water is within the range +20…+30 °C, selectiveness of the membrane insignificantly decreases, and capacity increases leading to insignificant growth of the TDS indicator. Application of the filter when the temperature of feed water exceeds +30 °C is not recommended.
CONSTRUCTION
Filtration module with domestic pump
Plastic storage tank (general vol. 12 L, effective vol. up to 7 L)
Chrome ball valve faucet ‘Droplet’ for purified water
Included feed water adaptor with feed valve for connection with water mains
Ball valve faucet of storage tank
Set of color tubes (4 pc.) for convenient filter installation
Drain saddle clip for connection of the filter to sewers
Set of replacement pre-filters (1st, 2nd, 3rd stages)
Ecosoft membrane 50 GPD (190 L per day)
Service wrenches for replacement of filters and the membrane
10 Year Warranty without filter cartage
