Ahuja AWM-490V2 Microphone
In The Box
Unit, 3 m Cable, Adapter, Receiver: Unit, 3 m Cable, Adapter, Receiver
General
Brand: Ahuja
Type: Vocal Microphone
Wired/Wireless: Wireless
Purpose: PA Applications, Stage and Auditoriums, Seminar Halls, Places of Worship, Recreation Centrers
Model Name: AWM-490V2
Microphone Capsule Features
Frequency Response for Microphone: 50 - 15000 Hz
Sound Features
Dynamic Range for Microphone: 100
Signal-to-Noise Ratio: 100
Functions
Other Functions: Quartz Crystal Locked VHF High Band Frequency and Available in 5 Different Frequency Groups
Wireless Microphone Features
Other Wireless Features: Dual Channel VHF Wireless Microphone
Wireless Receiver Features
Frequency Stability: 0.005 %
Signal-to-Noise Ratio: 100 dB
Distortion: 0.5 %
Antenna Type: Telescopic
Controls: On/off Power Switch, Audio Output Volume Control
Indicators: Red LED for Power ON, Green LED for RF Reception for Each Channels
Connectivity Features
Other Connectivity Features: Internal Dipole Antenna
Power Requirements
Power Source for Microphone: Battery
Power Source for Wireless Receiver: AC Adaptor
Wireless Microphone Battery Capacity: 9 V
Wireless Microphone Battery Life: 8 hr
Other Power Features for Wireless Receivers: 0.5 Distortion, Frequency Response 50 - 15,000Hz, 25kHz Maximum Deviation
Additional Features
Other Features: Modulation Mode FM F3E, Dynamic and Cardioid Microphone Element, Red and Green LED for Indicating Microphones On, 0.20 Kg Weight With Out Battery
Dimensions
Height of Microphone: 242 mm
Head Diameter: 52 mm
Width of Wireless Receiver: 210 mm
Height of Wireless Receiver: 42 mm
Depth of Wireless Receiver: 152 mm
Weight of Wireless Receiver: 0.7 g
Warranty
Warranty Summary: 1 Month Ahuja domestic warranty, including only manufacturing defects and services, but not defects due to mishandling.
Covered in Warranty: Any manufacturing defect or non-functionality of the product.
Not Covered in Warranty: Manual damage to the set is not covered under warranty.
Warranty Service Type: In case of any manufacturing defect or non-functionality of the product, the customer would have to take the product to the nearest service center. The service center would repair the fault. Incase the fault is not serviceable, the service center would take a call & give the replacement to the customer.
