High quality 360 degree PIR Infrared motion sensor light lamp ceiling switch 110V / AC 220V / AC inlay sensor switch - ET041 Tecio
360 Degree PIR ইনফ্রারেড মোশন সেন্সর সিলিং লাইট ল্যাম্প সুইচ 110V / AC 220V / AC
Installation: (as shown): 1. Turn off the power.2. Move the clear vinyl cover to the bottom of the sensor.3. Loosening the screws in the connection terminal, connecting the power and nominal load to the connection terminal of the sensor in accordance with the connection sketch map.4. Tighten the screws; Place the transparent vinyl cover in the original station.5. By folding the metal spring of the sensor up until they are in the “I” position with the sensor, then place the sensor in the hole or installation box that is in the ceiling, the size is similar to the product. Release the spring, the sensor will be installed in this installation position.6. After installation is complete, the sensor can be powered up and tested.
Search power: 110V / AC-240V / AC
Detection range: 360 °
Material: Plastic
Features: PIR motion sensor switch
color: white
Power frequency: 50 Hz / 60 Hz
Operating temperature: -20 ~ + 40 ° C
Ambient light: 3-2000LUX (adjustable)
Operating humidity: <93% relative humidity
Delay time: min.10sec ± 3sec
Max: 2 minutes
Power consumption: 0.45 W (work) 0.1 W (static)
Rated load: 1200 W (incandescent lamp) 300 W (lamp to save energy)
Motion detection speed: m / s ~ 1.5 0.6
Detection distance M: 6 m max (<24 ° C)
Installation Height: 2.2 m ~ 4 m
