Wireless-N repeater keeps rebooting issue is one of the most common issues faced by users due to which they are not even able to perform WiFi repeater login. In case you are also tired of seeing your device reboot non-stop, it might be because of these reasons:
- Your Wireless-N WiFi repeater is not getting an adequate power supply.
- The repeater is kept in one room and the router is placed in another.
- Your repeater’s signals are getting interrupted by transmitting appliances.
- The router-repeater connection is not stable.
- Technical glitches can also cause the repeater keeps rebooting issue.
Now you can follow the troubleshooting tips mentioned below to resolve the Wireless-N repeater keeps rebooting issue in no time possible.
[Fixed] Wireless-N Repeater Keeps Rebooting Issue
1. Repair the Electrical Outlet
The number one reason why you are stuck with the Wireless-N repeater keeps rebooting issue is because the wall socket to which you have connected your networking device is damaged. A damaged wall socket can be taken care of if you repair it.
In case repairing the wall socket does not help you out either, then it is recommended that you connect your repeater to another wall socket. Now, check if you are able to fix the Wireless-N repeater keeps rebooting issue. If not, then, keep reading.
2. Place the Devices in One Room
Another reason why you are facing the Wireless-N repeater keeps rebooting issue is because the distance between the repeater and router is too much. The repeater is kept in one room and the router is kept in another.
To make sure that signal transmission happens seamlessly between the networking devices, you need to pull them closer. However, ensure that they are not kept too close to each other. Or else their signals will clash.
3. Stabilize the WiFi Connection
Perhaps the Ethernet cable connecting the Wireless-N repeater and the host router is damaged due to which the connection between them is not stable. To prevent this from happening anymore, take our advice and use another Ethernet cable.
Apart from ensuring a stabilized connection between the networking devices, see to it that the ports located on them are not damaged. Otherwise, even using a new cable will go in vain and you will end up inviting more technical issues in the future.
4. Relocate the WiFi Repeater
Bluetooth speakers, mirrors, fish tanks, cordless phones, microwave ovens, refrigerators, treadmills, televisions, washing machines, baby monitors, aluminum studs, etc are some examples of things that interfere with the signals with the repeater.
To eliminate this as one of the reasons behind the Wireless-N repeater keeps rebooting issue, it is suggested that you change the location of your networking device and keep it away from all the examples given above.
5. Reset the Wireless-N Repeater
Did none of the aforementioned troubleshooting hacks help you to resolve the Wireless-N repeater keeps rebooting issue? Nodding your head in yes? Well, in that case, it is recommended that you reset the networking device.
The same can be done if you locate the Reset button on your device and press it for approximately 30 seconds to 5 minutes. Once your device resets, it is recommended that you let it reboot. Otherwise, the results will be fatal for you.
6. Install the Repeater Again
As soon as you are done resetting your networking device, set it up from scratch. There are two methods through which you can set up the Wireless-N repeater. The first is the WPS method and the second is the manual method.
In case you are interested in knowing how to perform WiFi repeater setup on mobile, then you should waste no more time referring to the instructions given in the user manual which you got at the time of purchase.
To Conclude
This was all about the troubleshooting tips through which the Wireless-N repeater keeps rebooting issue can be resolved. While learning how to resolve the issue, if you came across any other tip through which the same can be troubleshot, then it is recommended that you share it with your fellow readers. Are you wondering how you can do so? Well, it is quite simple. Just make use of the comment section. Your comment will become visible soon.