Solar panel

home technology how to install solar panel


Information website about the method of installing Solar Panel in Australia and an explanation of the electrical circuit that forms the solar energy system. The installation of a solar energy system to provide a house with electricity is subject to some standards that must be respected by the person who installs the solar energy panels. So it is advised to install it by a professional and experienced person. But in this topic we will explain the most important stages of installing these panels and the steps that must be taken when installing.

Definition of solar energy:

Solar energy is the energy that is produced through the sun’s rays. And this energy can be used as electrical energy or thermal energy. And when using this energy. We do not use any energy source from the earth such as oil. Coal. Or otherwise. So solar energy is called renewable energy and It is a clean energy that does not lead to any pollution on the earth, and this is one of the most prominent advantages of solar energy. Which is what made interest in it increasing in order to develop it so that it would be a major source of electricity as well as wind energy.

 The most important steps for installing solar panel:

When installing solar energy panels. You must make sure of the place where we will install these panels. As it must be able to carry these panels. And that this place is exposed to direct and free sunlight. We must make sure that there is no obstruction to the sun’s rays. Such as no shadow reaching the location of the solar panels.

How to connect the solar panel electric circuit:

First: We take two wires from the solar energy panels. I.e. we take the positive wire that is red and the negative wire that is blue and we connect them to the voltage regulator in the two inputs that have the symbol of the solar panels. We put the red wire in the positive + input and the blue wire in the negative input

Second: We take two positive and negative wires from the voltage regulator from the port that has the battery symbol on it and connect them to the battery.Polarity must be respected. The red wire is in the positive pole and the blue wire is in the negative pole.

How to install the electrical circuit of a regular household refrigerator

Explanation of overload malfunctions in the refrigerator and the method of testing and checking it

Third: There remains a port on which the lamp symbol is located. And the wires that come out of this port go to feed lamps or devices that operate with a voltage of 12 volts DC. And polarity must always be respected when connecting any device to a continuous current.

positive and negative, and connect them to the positive and negative port in the first interface of the INVERTER.

Fifth: In the second interface of the INVERTER. An electrical socket is required. Through which electrical appliances with a voltage of 220 volts AC are connected. And the capacity of the transformer must be taken into account so that it can operate the devices associated with it

. RECOMMENDED ARTICLE: NAVIGATING THE COMPLEXITIES OF DEFI: WHY BUSINESSES NEED EXPERT DEVELOPMENT SERVICES

Leave a Reply