Six Tips to Fix Netgear Router Not Connecting to Internet Issue

In case you are one of those users who are finding it difficult to connect the Netgear router to the internet, then this is the perfect article for you. The reason being, it consists of all the troubleshooting hacks through which getting rid of the issue at hand will become a piece of cake for you. Keeping this in mind, you should not waste any more time waiting and read on. For your information, some of these hacks can also be used if you ever face the routerlogin.net not working issue.

[Fixes] Netgear Router Not Connecting to Internet Issue

Check the Cable in Use

First of all, double-check the Ethernet cable which is connecting the Netgear router to the existing modem and computer. In case, it has cuts on or in it, then it is recommended that you use a new cable to connect the devices.

What is that? Are you not in the mood of stepping out of your house and purchasing a new cable for the establishment of the connection? Well, in that case, take our advice and connect the devices with the aid of a wireless source of connection.

Avoid Too Much Distance

Chances are that the distance between the Netgear wireless router and the existing modem is way too much which is making it difficult for the signals between them from getting transmitted thereby causing the issue that you are facing right now.

Taking this into consideration, you should avoid too much distance between the networking devices. Make sure that they are kept in proximity. After that, see if you are able to fix the Netgear router not connecting to internet issue.

Get Rid of Technical Glitches

Considering you are reading this hack, it can only mean one thing, i.e. you are still a victim of the Netgear router not connecting to internet issue. Well, this might be because of technical glitches. To eliminate them, restart the device.

Restarting the router is quite easy. You can easily restart your device by powering it off, holding on for some time, and then, turning it back on. It is advised that you wait for at least 30 seconds while restarting your device.

Repair the WPS Button of Netgear router

Another reason why you are experiencing the Netgear router not connecting to internet issue wirelessly is because the WPS button on either the router or the modem is broken. In this case, you need to get the WPS button repaired.

Although this will fix the Netgear router not connecting to internet issue for you, on the off chance, it refuses to, then you should opt for an Ethernet cable to connect the router to the existing modem in your home.

Reset the Netgear Router

Despite following all the hacks given above, if you are still experiencing the not connecting to internet issue, then you are left with no other option than to reset your networking device to its default factory mode.

The same can be done if you locate the Reset button on your router, press it using oil pin, and wait for approximately 2 minutes. Once your device resets, it will start rebooting. Avoid unplugging your router during the process.

Set Up the Device Again

Once you are done resetting your device, set it up by referring to the steps given in the manual. Whether you want to execute Netgear N300 wireless router setup or install any other router model, you will find the steps to do in the user manual.

Wrapping Up

Here ends the article written on how to troubleshoot the Netgear router not connecting to internet issue. Hopefully, the hacks given above were able to help you connect the router to the internet successfully.

Read more- HOW TO FIX NETGEAR ROUTER NOT CONNECTING TO MODEM ISSUE?