Is your Netgear router not in the mood to connect to the existing modem? Well, this might be because of a damaged Ethernet cable, too less distance, signal interference, technical glitches, improper routerlogin.net setup, and many more reasons. But, let us not focus on the reasons. Instead, pay attention to the solutions through which this issue can be put to rest. You can do so by referring to the ones given in this guide. They will surely help you.
Netgear Router Not Connecting to Modem Issue [Fixed]
Fix 1: Check the Ethernet Cable
Start with the troubleshooting process by checking if the cable connecting the Netgear wireless router and the existing modem is damage-free or not. In case, it is not, then you need to replace it with a new one.
Although replacing the wire will help you out, by any chance it refuses to; you are free to connect the networking devices with the help of a wireless source of connection. The same can be done if you refer to the instructions given in the user manual.
In case you do not do so, then press the WPS button on the router and then the modem. In some time, your devices will get connected wirelessly.
Fix 2: Create Some Distance
Another reason why you are stuck with the Netgear router not connecting to the modem issue is that there is too less distance between the router and the existing modem. This might be causing their signals.
To take care of the problem, it is recommended that you create some distance between the devices. However, avoid creating it too much. Otherwise, their signals will find it difficult to get transmitted properly thereby causing more technical issues for you.
Fix 3: Remove WiFi Interference
Is your Netgear wireless router kept near Bluetooth speakers, cordless phones, washing machines, microwave ovens, refrigerators, mirrors, fish tanks, treadmills, televisions, mirrors, fish tanks, and other similar things?
Well then, it is quite obvious why you are experiencing the Netgear router not connecting to the modem issue. Therefore, change the location of your networking device and keep it away from all the aforementioned examples.
Apart from the examples given above, also avoid keeping your wireless router in corners or near thick concrete walls as they will completely block the signals emitted from it. And we are guessing that you do not want that, right?
Fix 4: Reset the Netgear Router
This is a solution when nothing seems to work for them. Considering nothing has worked for you so far, there is no hack better for you to resolve the Netgear router not connecting to the modem issue than this one.
In order to reset or restore your networking device, you need to press and hold the Reset button located on it. Make sure that you are using an oil pin to press the Reset button. Otherwise, you will not be able to reset the device properly.
As soon as you are done resetting your device, set it up from scratch. You can execute the process by accessing the 192.168.1.1 IP address. If you want to know how to go about the configuration process, then refer to the user manual of your networking device.
Fix 5: Power Cycle the Devices
In case you are still going bonkers because of the Netgear router not connecting to the modem issue, then it is because your networking devices are asking for a reboot. This means that you need to give your router, modem, and computer a restart.
It is recommended that you give enough time to the devices to get restarted thoroughly. Once you are done restarting them properly, check if you are able to connect the router to the modem this time. In case you are still stuck with the same, read the next solution.
In Conclusion
Here ends the article written on how to resolve the Netgear router not connecting to the modem issue. While learning how to fix this issue, if you came across any other tip through which the same came be troubleshot, do share it with your fellow readers.